Need Immediate Assistance? Call us at 601-360-8070. | Send Flowers
        

THE CREMATION PROCESS

The following information is furnished to enable you to more fully understand some of the terminology and procedures involved in the cremation process.

Depending on local laws, there may be a waiting period of up to 48 hours from the time of death before the human remains may be cremated.

Before cremation, mechanical devices such as pacemakers must be removed because they may explode during the cremation process, causing extensive damage both to the integrity of the human remains and to the cremation chamber.

To begin the cremation process, the human remains and the cremation container are placed in the cremation chamber. Open flames raise the temperature to 1600-2000 degrees Fahrenheit for a period of approximately two to three hours. The time varies with each human remains.

When the cremation is performed in a chamber which utilizes a secondary afterburner chamber, the partially cremated remains are moved into this secondary chamber for completion of the cremation process. In cremation chambers without a secondary chamber, the partially cremated remains may be repositioned to facilitate completion of the cremation process.

To reposition the human remains or to remove the cremated remains from the cremation chamber, a broad, rake-like instrument is used. Every effort is made by the operator to completely remove every particle from the chamber floor.

After the cremation process is completed, the cremated remains are removed from
the cremation chamber and placed in a tray for cooling. They are then processed to their final reduced consistency. The processed cremated remains are placed into an urn, or some other type of container, according to the wishes of the family. Most cremated remains weigh between 4 and 8 pounds, depending on the bone structure of the human remains.

Metal objects, such as jewelry and dental gold, may break down into small pieces during the cremation process. These small pieces, along with larger pieces of metal (e.g. hinges, screws, and prostheses), may be removed from the cremated remains using a magnet or some other means, then disposed of according to local laws and company policy.

The family chooses the final disposition of the cremated remains. Pending this decision, your funeral professional will hold the cremated remains for a very limited, specified time. The family may select inurnment in a permanent location, such as a mausoleum/columbarium niche, cemetery plot (many cemeteries allow urns to be buried in the same plot as a previously interred casket or other urns), or other special location of the family's choosing. Alternatively, the remains may be scattered in a cemetery scattering garden, at sea, or in some other location, so long as it is in accordance with local laws. However, the decision to scatter should be chosen carefully as it is irreversible.

Any further questions regarding the cremation process should be addressed to the funeral professional that assisted you in making these arrangements.

 

SEARCH FLOWOOD OBITUARIES
Register for Obituary Notifications


114 Burney Drive | Flowood, MS 39232 | Map & Directions | 601-360-8070 | Email Us at wrightferguson@colonialtel.com.     Like Us On Facebook

©2020 Wright & Ferguson Funeral Home | Privacy Policy | Site Created By Gemini Graphics Inc.